Calibrate 16 MP camera - ready for a perfect positioning of your engraving in just 5 minutes!
So you calibrate a 16 MP camera in your laser! After installing the camera, it must now be calibrated. 1. For this we open lightburn and click on the tool for "Calibrate camera lens". Now we fol...
Install 16 MP camera - preparation for a perfect positioning of your engraving!
So you build a 16 MP camera in your laser! In this video we lead you step by step by installing a 16 MP camera into the CO₂ laser machine Nova 35. We will show you: The correct selection of...
Cut the acrylic 5 mm correctly
Cut the acrylic 5 mm correctly How do I find the right parameters for my machine? If you bought it from a specialist dealer and not in the hardware store, th...
Chiller - How do I let the water out of the tube?
A customer asked what to do if he wants to transport the machine to a new place of use. Appearable point is to let the water out of the tube and thus separate the chiller and the machine. Here is a...
Find out how to clean the lens and mirror of your Nova in this short video.
What NOVA machine sizes are available?
Here is a brief overview so that you can quickly decide which machine is right for you! Nova 24 with 600x400 mm work surface Nova 35 with 900x600 mm work surface Nova 51 with 1300x900 mm work surf...